01 Laser cutting: instantaneously high temperature melting by laser, the edge banding degree reaches 99%, no chips, no dust, clean treatment such as net shower and cleaning can be done after cutting, so that the product can reach a higher dust-free standard. The disadvantage is that the edge is a bit hard because it is melted, and 75% of the market uses this edge sealing method;

02 Ultrasonic cutting: through the vibration generated by the ultrasonic vibration unit-vibrator, the electrical energy is converted into mechanical energy, and the heat is transferred through the welding head, and the fabric is squeezed by the tool. The edge banding degree is less than 80%, and the edge banding is better than laser edge banding. More soft and beautiful;

03 Cold cutting: Cut directly with electric scissors without edge sealing. This cutting method is easy to produce lint on the edge, and the technology and cost are the lowest. Moreover, it cannot be cleaned after cutting. During the wiping process, a certain amount of cloth debris will be generated on the edge. , No cleanliness. Generally not recommended for high-end wiping;