Melt blown non-woven fabric is called the 'heart' of medical surgical mask and N95 mask in the industry. It is the filter layer in the middle of mask, with good filtration, shielding, heat insulation and oil absorption, and is an important raw material for mask production. It is necessary to use melt blown non-woven fabric to produce masks. The gap of mask is huge, so the gap of melt blown non-woven fabric will be bigger!
According to the statistics of China Industrial Textiles Association, the production process of China's nonwovens industry is mainly spunbond. In 2018, the output of spunbond nonwovens was 2.9712 million tons, accounting for 50% of the total output of nonwovens, mainly used in the field of sanitary materials; however, there are not many manufacturers of melt blown nonwovens, the proportion of melt blown process is only 0.9%, and the output of domestic melt blown nonwovens is 53500 tons / year. These melt blown fabrics are not only used for masks, but also for environmental protection materials, clothing materials, and electricity Pool diaphragm material, wiping material, etc.
At present, according to the latest data, the national production of melt blown non-woven fabric is less than 100000 tons / year. Melt blown non-woven fabric is called the 'heart' of medical surgical mask and N95 mask in the industry. It is the filter layer in the middle of mask, with good filtration, shielding, heat insulation and oil absorption, and is an important raw material for mask production. A mask only needs a few grams of meltblown, while a new meltblown production line usually takes a year.
Under the epidemic situation, the demand for masks has greatly increased. According to the data of the fourth national economic census, the total employment population of legal entities and self-employed households in China is 533 million. At least 533 million masks are needed per person per day. According to the data from the Ministry of industry and information technology in February this year, the maximum daily output of masks in China is 20 million. There is a huge gap in masks, many enterprises began to cross-border production of masks. According to Tianyan data, based on the industrial and commercial registration change information as the standard, from January 1 to February 7, 2020, more than 3000 enterprises in the country have added 'masks, protective clothing, disinfectants, thermometers, medical devices' and other businesses. It is necessary to use melt blown non-woven fabric to produce masks. The gap of mask is huge, so the gap of melt blown non-woven fabric will be bigger!
In this case, the state has launched some source enterprises to put into production and improve production capacity, but at present, it is not optimistic in the face of the textile platform and textile people's circle of friends seeking melt blown non-woven fabric everywhere. China's production speed in this pneumonia is facing unprecedented challenges! But I believe that in the face of the increasingly better situation, I believe that everything will be better.
